Some lubes used on commercially cast bullets seem to be little more than colored paraffin wax, and pretty well useless. Poor quality or insufficient lube is also a problem. The bullet has to be soft enough to upset to fill the grooves or powder gasses will blow by the bullet and solder the lead to the bore. 45 Colt loads) using some commercial "hardcast" bullets leaves a lot of lead in the barrel. Mike in coMike, I mostly agree with you, but there is also a problem with bullets that are too hard. I shoot a 44 mag in a match once a month, aprox 65 rounds of 300 gr bullets.and have no leading.i clean the cylinder and run a wet patch thru the bore.done. 001 over bbl throat dia/slighly under cyl throat dia and if the muzzle is larger you are fighting an up hill battle).ģ)hard enough for the velocity you are shooting. The best process for lead bullets is to not lead the gun to begin with.then one does not need a lead removal product.ġ)a lube that makes it to the end of the bblĢ)dia to fit the gun( aprox.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |